Commercial Electrical Remodel Is Alternative Way To Make Your Home Save

Electrical Remodeling Tricks, Tips, and Hacks

Taking Safe Shortcuts

When it comes to minor electrical upgrades and remodeling projects, less is often more. That is, the less you can mess with the existing fixtures and wiring, the better. If something is unsafe or improperly wired, of course, you should replace it. But if you just need to add a light here, an outlet there, it can pay to look for ways to streamline the process. The following tips can help.

Need a Receptacle? Look on Other Side of the Wall

We tend to think room by room, forgetting that an interior wall is nothing more than some framing and two layers of drywall (or plaster). Electrical wiring runs inside the walls and can be accessed from either side. So if you need to add an outlet (receptacle) to a room that has no nearby outlets, check the opposite side of the wall. If there’s an outlet (or a light switch) close by, you can cut a hole in the wall behind the outlet box to tap into the circuit. Just be sure you know what circuit you’re tapping into, and don’t exceed its safe load limit by adding a new outlet.

Move Ceiling Lights Without Running More Wire

Sometimes ceiling lights aren’t where you want them to be. But you may find that you can move a ceiling light surprisingly far without adding more wire or running a new circuit. The electrical runs in your attic often have some room for movement. You can increase this by removing a few of the staples that secure the electrical cable to the framing. Be sure to re-fasten the cable with staples after you’ve moved the fixture.

Take a Homeowner’s Electrical Exam and Save Money

Amateur, non-permitted electrical work in residences isn’t uncommon. For small jobs, like adding an outlet, it’s likely that you don’t even need a permit to do the work. However, for more major electrical work, like adding new circuits or installing a subpanel, you most certainly will need a permit. And permits usually mean working with a licensed electrician.

However, in some areas, homeowners can legally do their own electrical work and get fully permitted and approved. The bar to this is a ​homeowner’s electrical exam. It’s not standard everywhere but is growing in use. A homeowner studies up for the test and pays a nominal fee. They then take a test consisting of 10 to 20 questions, usually at the permitting office. If you’re qualified to do the work yourself, you’ll save the cost of hiring a pro. If you’re not qualified, use an electrician.

Open up Closed Boxes to Add New Fixtures

These are easy to miss: electrical boxes that are covered up and often painted over. They are such a part of the landscape of our lives that we barely notice them. But they usually have live power in them: that’s the reason for the cover. Boxes that contain wiring must have a cover that encloses the box and remains accessible. Remove the cover and test the wiring for voltage with a non-contact voltage tester. These detect voltage through wire insulation, so you don’t have to risk touching any bare wire ends.

Use “Old Work” Electrical Boxes as Needed

Old work boxes also called remodel or cut-in boxes, are designed to be installed after the wall or ceiling drywall is in place. They have flip-up ears or bending tabs that snug up to the backside of the drywall to secure the box. You simply cut a hole that’s a close fit for the box, insert the electrical cable into the box, slip the box into the hole, and tighten the screws to pull the ears or tabs tight to the drywall. This saves you the trouble of cutting out a large hole in the wall or ceiling to install a standard box against the framing.

 

Planning to Remodel Your House? Make Sure You Call Your Electrician

After a period of time, everyone thinks about remodeling their homes or adding some additional features to it. Actually, that’s a great thought! But what does a successful remodeling require? The simple answer to this question is a great plan. A successful remodeling needs and demands creative and thoughtful planning. This planning should be advanced in every aspect. For example, consider your electrical room. If you are planning to increase the number of rooms then the electrical burden will be more.

Hence you need to plan it big and safe for the safety of everyone in your family. In this article, we will see why we should call our electrician before starting the remodeling and what are the electrical tips which have to be taken care of before the build starts? Before we talk about the importance of electrician, let’s have a look at the types of remodeling. There are various types of remodeling. Based on people’s requirement they have been classified under various categories. Understanding these types of remodeling will also help you decide what you want for your home. This will also guide you through the electrical changes you must bring to your house.

House Remodeling Types

House Renovation

Renovation is the minor changes that you plan to bring to your house. The whole purpose of the renovation is to add some additional features to your homes like replacing windows with a fancy one or having your interior designed with more attractive décor and design. Renovation is also done to make the house more energy-efficient. Electrical changes often are not a part of the renovation. But in case you are planning for safe electrical installations then it can be a part of it.

Home Update

The home update usually refers to the updating of functionalities in one or more rooms. A nice example of this is the upgrades we make in the kitchen. For example the addition of a few or more shelves. This may also include changes in electrical outlets and the installation of additional plugs across the home.

 

Remodeling? Consider These 3

Could you imagine your life without electricity? From turning on the lights to running televisions and other electronic devices, we use electric power for so many things. In fact, we often take it for granted. However, you should always keep your home’s electrical system in mind. This is especially true if you’re remodeling your home. The residential electricians at Polk Electric have three tips for your home remodeling projects.

Schedule an electrical inspection – Before you begin your remodel, call a residential electrical contractor to inspect the property. Sadly, many homeowners find out too late that they harmed their home’s electrical system while remodeling. After the inspection, consider hiring a professional electrician to handle any repairs or upgrades, especially rewiring. Safety comes first. Your primary goal should be to make sure everything is working properly and has been done correctly.

Know what should get the most attention – Know which electrical components are the most critical. It’s true that light fixtures may be the thing that catches your eye, but what’s behind the scenes is really more important. For example, consider the wiring, electrical panels, and circuits. If you install the wrong parts (or install them incorrectly), you could wind up facing serious problems in the future. You could even put your family in danger. Place these items on the top of your priority list during your remodel. You can always add other conveniences and upgrade the fixtures later.

Think twice about your lighting – When you’re installing light fixtures, less is more. While this may sound surprising, it’s very easy to over-do the lighting in your home while you’re remodeling. Talking with a residential electrician is the best way to come up with a good lighting plan. Our contractors will help you find the best places to add lighting for maximum impact without going overboard.

 

4 Tips for Home Electrical Remodeling

Remodeling you home interior can be both an exciting and challenging time. Whether it’s the kitchen, bathroom, or basement, it’s important to consider every component of the room, before you launch. Many homeowners never consider the electrical wiring in their homes, however, when they’re making adjustments or upgrades. The result is that they get everything set in place, and then have to go back in and redo the electrical wiring which can cause unneeded expense and wasted time and effort. So before you make the first step in your renovation, consider your electrical system first and make the necessary adjustments.

Rewiring & Rerouting

Most room renovations include moving things around. For instance, you may re-conceptualize your entire kitchen and want the counter transferred to the other side of the room. While this may be a more aesthetically pleasing approach, your current electrical system may not be in position to accommodate the move. Before you know it, you have to pull the counters back off the wall, and make the adjustment. So make sure that there are actually wires behind the wall before you move your kitchen components, appliances, or electronics. Also, this is a great time to consider whether you need to upgrade your electrical wiring – especially if you’re going to be ripping down walls.

Electrical Panel Upgrades & Other Updates

Today’s modern technology requires much more power than the older models. Although many manufacturers boast the energy efficiency, by comparison they still utilize more energy. This is due to large machines and added features on appliances such as washers and dryers, refrigerators, microwaves, dishwashers, and media driven electronics like TV’s and stereos. Overall, the average household is using 30%-50% more energy than ever before. When remodeling any room in your home, consider how much energy it will utilize and whether or not your electrical system can handle it in a manner that is safe and efficient.

Outlet and Receptacle Considerations

Outlets and receptacles are like any other part of your electrical system. When installed, they must be safe and efficient. You may love the way a certain receptacle looks on your wall. The real question, however, is will it perform the way it’s supposed to. You’ve noticed that high-energy appliances use different receptacles, such as a specialized model for your washer or dryer. The reason for this is that these appliances require large amounts of power and need a certain of receptacle that can accommodate it. When remodeling, get advice from a professional electrician in order to get the right outlets and light switches for the electronics and appliances in your room. There are several options and many of them come with great decorative features that put the finishing touches on your room.

Great Light Switch Features

When it comes to creating the right room atmosphere, lighting is everything. The right light can create energy or give you a soothing environment. Although the right type of light is important, light switches can often give you the same affect. For instance, faders, which are extremely popular, can control the amount of light is in the room. There are numerous options for light switches including 3-way, 4-way, sliders, different size switches, multi-locations, dimmers, and even remote control lighting. With all the options available, you never have to settle for boring light switches again!

 

Electrical Safety Tips for Remodeling Your Home

When it comes to home improvement, remodeling and home projects, electricity is no laughing matter. When performing electrical work, even the most simple of mistakes can cause a fire – or worse, result in personal tragedy. Even outside of home projects, knowing the signs of electrical danger is important, and with that in mind, in today’s article we present you with some great electrical safety tips.

Home Improvement Electrical Safety Tips

Before you begin any home improvement project that involves electrical work, ask yourself this question: am I a licensed electrician? If the answer to that question is no, then we strongly suggest you put down the tool belt and back slowly away from whatever work you are about to undertake. Calling in a professional to handle the electrical part of your DIY or remodeling job is smart for many reasons – if not just for safety alone!

Dress for the (Electrical) Job

Dressing for the job is about more than just making a fashion statement – no matter how good you might look in those overalls! Wearing the right clothing and protective gear while tackling a home improvement project is crucial to your well-being, especially if it involves electrical work. Wear shoes or boots with rubber heels and soles to help insulate your body against shock. A nice pair of high voltage electrician gloves also will go a long way toward absorbing any errant electricity.

Use Insulated Tools for Electrical Work

The tools you use for any home remodeling work (even those that may not involve electrical directly) should come equipped with insulated handles. Power tools should be UL-listed (Underwriters Laboratories) or bear the UL mark to ensure they meet compliancy and safety standards.

Of course, it should go without saying that you should also clean and properly maintain your tools. If your power drill is damaged or the charging cord is frayed, replace it – don’t just slap some tape on it!

Turn off the Circuit Breaker

Even if you are confident that your circuit breaker panel is labeled properly, it is best practice to go ahead and cut power to the whole house by flipping off the main breaker. Working on live circuits is a big no-no and is a real safety hazard. Don’t take the risk – flip the switch!

Ground Fault Circuit Interrupter

Ground Fault Circuit Interrupters (GFCIs) are electrical devices that “monitor” electrical currents and shut them off the moment they detect even the most minute of changes. This protects you – and equipment – from electrical harm. If your home does not have a GFCI or ground fault circuit breaker, be sure to have one installed, even if you are not undertaking any home projects.

Call a Licensed Electrician

At the end of the day, calling in a licensed electrician to handle electrical work in your home is the safest – and best – thing to do. In addition to performing the job safely, an electrical contractor will do the job right – saving you from future issues and reducing your risk of electrical fire or power failure. In addition, an electrician can pull permits for you and offer tips and advice for energy efficiency that can help you save on your monthly energy bills.


Do Window Cleaning For Clean Window In Your Office

5 Reasons Why Window Cleaning Is Important

Everybody cleans their teeth every morning / evening and thinks twice about it. This is a very important routine in everyones daily life because it keeps us healthy. This idea and routine is not applied to other important areas of the home. Every now and again we all clean our home windows but put off doing it for as long as possible.

There are many reasons why you should get your windows cleaned regularly and in this article we explore 5 reasons why window cleaning is important.

  1. The Structure of Glass

Glass is porous and collects dirt and if left over time, can make it fragile or prevent as much natural light as possible from entering your property. Alongside of this, the build up of pollutants can ruin the glass completely through smears, streaks and pigmentation spots. The main pollutants are:

  • Hard Minerals
  • Oxidisation
  • Acid Rain
  • Salt and Grit
  • Overspray
  1. Property Appearance

Most people don’t appreciate how different clean windows can make a property look. It can drastically effect the way people perceive your house or business. People pay attention to cleanliness and will subconsciously appreciate the effort you’ve gone through to create a pleasant environment.

Would you feel comfortable going to the doctors if all the windows were caked in dirt (inside and out)? Probably not. The same goes for your home and place of business. Clean windows will always attract more visitors and make people feel more comfortable. Also, if you are trying to sell or rent your property then it’s very important to keep your windows clean as cleaner properties were sold at higher prices on average than those with dirty windows, frames and sills.

  1. Heating Your Home

This surprises most people but it’s actually true that dirty windows do effect your homes heating efficiency. Pollutants resting on your windows and in the glass pores reflect more UV light which prevents the sun from warming up your home. This is exaggerated even more if your windows aren’t efficient in containing heat.

  1. Ongoing Maintenance

Just like with our teeth it’s always cheaper to maintain them regularly than wait and be exposed to expensive replacements or repairs. Through getting your windows cleaned regularly you will find that you can extend the lifetime of your windows dramatically. Not only this but you will protect the glass from small cracks, scratches, mould, algae growth and other pollutants. There’s no point in replacing the whole window when you could of got a quick and affordable window clean.

  1. It Just Looks… Nice!

There’s no getting around it, but clean windows (inside and out) always make you feel better. When in clean environments it boosts people mood positively and can also have health benefits. Not only this but it can help improve the perception of your home or business premises.

 

Window Cleaning Tips

Cleaning your windows properly has far-reaching benefits to you and your home. Did you know that there’s also an energy-saving benefit to having clean windows? This is because the cleaner your window glass, the more sun will shine in through your windows. The more sun shining through your windows, the more solar energy comes into your home. Solar energy is free and doesn’t harm the environment, and it will warm your home: a far-reaching money saving benefit! With that in mind, make sure you follow the tips below to help you achieve the cleanest windows on the block. If you don’t feel like getting wet or dripped on, or don’t have the extra time, then consider hiring a professional window cleaner to do the job for you.

Window-Washing Tips

  • Wash the outside of the window panes from left to right and the inside of the window from the top to the bottom. This way, if you notice streaks, you will know which side to do over.
  • Wash the windows from the top to the bottom so drips won’t streak or spot those you’ve already washed.
  • Have a soft toothbrush handy to clean inside corners.

Try these homemade window cleaning solutions:

  1. For regular cleaning: 1 gallon water plus 1/4 c. white vinegar or 1/2 c. ammonia. Mix it all together in a bucket and you’ll be ready to start.
  2. For heavy-duty cleaning: 1 gallon water plus 1/2 c. ammonia and 2 c. rubbing alcohol. Mix it all together and it will help remove hard dirt.

You may have seen your grandmother using scrunched up newspapers to clean her windows. I know that’s what my grandmother used, and window cleaning professionals agree that this still gives you the cleanest-looking windows. So if you don’t mind getting your hands dirty with a little newspaper ink, then grab some old newspapers and get started! Some other great window cleaning rags include percale pillowcases, cloth diapers, coffee filters and even some old cut-up undershirts!

Window Screen Cleaning

  • Use a vacuum attachment or a hand-held vacuum to clean your window screens and to remove dirt from the frames and window tracks.
  • To wash the screen, take it outside and put the screen against an outside wall or fence. Use a hose to rinse the screen. This process should remove most of the dirt. Using a nylon brush, scrub the screen with a mixture of dish soap and water. When you are done rinsing the screen, make sure to dry it well.
  • If there is still dirt on the screen or for general screen maintenance, use a lint brush to pick up any dust or dirt on the screen.

Tips for Aluminum Windows and Frames

  • To clean aluminum frames, use liquid soap and a scouring pad. After rinsing the frames out, put a few drops of vegetable oil on the tracks and then move the window up and down to distribute the oil over the frame area.
  • If aluminum storm windows won’t glide smoothly in their tracks, make a scrunched ball of waxed paper and rub it along the edge of the window casing a few times.

 

The Best Way to Clean Windows, According to Our Cleaning Lab

 Washing your windows is a tedious chore — so you want to make sure you get it right the first time. To avoid having to redo your work.

  1. Choose a dry, cloudy day.

“Do this job in the blazing sun and the cleaner will dry onto the hot windows before you get to wipe it off, leaving hard-to-remove streaks,”  If the weather won’t cooperate, start on the shady side of the house.

  1. Remove dirt and dust first.

Before you get started, sweep dirt from the window frame with a brush or vacuum it up with your machine’s dusting attachment. This will prevent dirt from turning into a muddy mess when mixed with a cleaner. If your window screen looks especially grimy, pop it out and wash with hot, sudsy water and a soft brush, then rinse and let dry before putting it back.For quickly dusting shades and blinds, Forte recommends going over both sides with a microfiber duster or opening the slats and going over each one with a damp cloth and followed by a dry one.

You can also refresh your curtains at the same time by putting them in the dryer for 15 minutes on an “air-only” cycle and rehanging quickly to prevent wrinkles.

  1. Pick the right cleaner — and spritz generously.

Don’t hold back on the spray, especially if your windows look extra dirty. “You need plenty of cleaner to dissolve and suspend the dirt so it can be completely wiped away — skimp and you’ll be seeing streaks,”.

Recommends Invisible Glass Cleaner With EZ Grip. The fine mist from the bottle stays where you spray until you wipe it, meaning less drips and mess.

Homemade Glass Cleaner

What you’ll need:

2 cups water

1/2 cup white or cider vinegar

1/4 cup rubbing alcohol 70% concentration

Combine the ingredients and pour them in a spray bottle. If you have kids or pets, write the ingredients on the outside of the bottle for safety.

  1. Use a microfiber cloth.

Some folks like drying panes with newspaper, but you’re better off reusable microfiber cloths. They are super absorbent, washable, and leave the glass shiny and streak-free.

Try Casabella Microfiber Glass Cloths, which have a special honeycomb texture to nab water spots, smudges, and dirt from mirrors and glass without scratching.

If you rather use paper towels, choose a brand that’s up to the task. Weak paper towels can shred and leave lint behind. In our last paper towel test, GH Seal Holder Bounty Regular held up the best when wet.

  1. Skip the squeegee.

Professional window cleaners swear by them, but you have to know how to use them right. “You squeegee down and where does the water go? On the floor.”

Because of the potential mess and drip factor, she avoids using squeegees, especially for small panes, but they can be more helpful on bigger, picture windows.

  1. Break it down.

You only need to clean your windows once or twice a year,  but it’s even easier if you divide the job up and do it room by room. When you’re cleaning, wipe one side of the window horizontally and the other vertically. If any streaks do form, you’ll easily know whether they’re on the outside or the inside.

 

Cleaning Windows with Vinegar Without Streaks

Vinegar is a miracle from nature. Completely non-toxic and anti-bacterial, vinegar is actually beneficial to any surface it touches. It safely kills germs and is much more economical than chemical cleaning solutions. It’s not even harmful when accidentally inhaled or ingested. (If you’ve got kids, you’ll love that part).

The acidic composition of vinegar acts quickly to break down the kind of film that frequently accumulates on glass surfaces. When you wash a window using a solution that contains vinegar, the results will almost always be free from streaks and sparkling clean.

Recipes for Vinegar Window Washing Solution

Martha Stewart included a section with detailed recommendations for window washing in her series, “20 More Things Everyone Should Know”. Below are a few choice tips, along with her vinegar window-washing recipe.

  1. Mix one part hot water to one part distilled vinegar.
  2. Sponge cleaning: Moisten the window, using the solution, then clean.
  3. Squeegee cleaning: Always dampen the squeegee first and clean from the top down, wiping the edge of the squeegee after every stroke.
  4. Clean only when there is no direct sun on the windows.
  5. Rinse and dry the window frames immediately to avoid any damage.

Green Living, from National Geographic, recommends this simple recipe, plus a few extra tips for the best window cleaning outcome.

  1. In a spray bottle, mix 50% distilled vinegar (white) and 50% tap water.
  2. For extremely grimy glass, prewash with very soapy water, then go to the vinegar spray.
  3. Got highly resistent spots? Try rubbing hard with a cloth dipped in undiluted vinegar.

Are the Streaks Still Blurring Your View?

Don’t blame the vinegar. Streaks are caused by residue left on the glass by commercial products. The answer? See the information below:

First Vinegar Wash

  • 2 c. water
  • 1/4 c. white vinegar
  • 1/2 tsp. dishwashing detergent or liquid

Combine these ingredients in a spray bottle, then just spray and clean.

Forever After Vinegar Wash

  • 1 c. water
  • 1 c. white vinegar
  • Combine these ingredients in a spray bottle, spray and clean. This is for normal windows.

Vinegar Wash For Horribly Grimy Windows

  • 1 c. full strength white vinegar
  • Warm up the solution and use directly on glass to clean.

What’s the Best Wipe?

You can ensure a streak-free, squeaky clean window by using one of the above tips and wiping with paper towels, microfiber cloths or newspaper. Whatever you use, make sure its lint-free.

HINT: Squeegees are harder to get the hang of, but they almost always do a better job.

Homage to Vinegar in the Home

Psst! Reader’s Digest recently published a collection of over 150 uses around the home for common vinegar. Here are just a few to give you a glimpse of tricks you are probably missing out on:

  • Clean window blinds- A cool idea is to don a pair of white cotton gloves, dip your gloved hands in a 50/50 solution of hot water and white vinegar, then clean the blinds by simply sliding your gloved fingers down each side simultaneously.
  • Unclog drains- Did you know you could use 1/2 cup of baking soda and 1 cup vinegar to foam clean a stubborn drain? Put the baking soda in first, followed by vinegar and watch the chemical magic. The combo kills bacteria too and is easier on pipes and drains than harsh commercial preparations as well.
  • Spiff up your silver- Combine 1/4 cup of white vinegar with 1 tablespoon of baking soda and soak your silverware in the solution. Rinse, then dry and voila!

Not just a cooking phenomenon, vinegar is truly the homemaker’s panacea!

 

What Causes Window Streaking?

Before we tell you how to get rid of your window streaks, it is helpful to understand what causes them in the first place. Here are the top two causes of window streaking.

  1. The Cleaner.- All window cleaning solutions are created equal? False. Some multi-purpose cleaners claim to be streak-free but fail to deliver. A big problem is the evaporation rate. If you’re cleaning your windows on a warm sunny day, the liquid part of the solution evaporates quickly and leaves behind a residue that appears as streaks. On the other hand, if you don’t entirely remove the liquid you can also be left with a streaky window. Take your time when you are cleaning your windows as being in a hurry is a sure-fire way of creating streaks.
  2. The Towel.- The type of cloth or towel used is also a factor. Towels that are not as absorbent spread dirt and moisture instead of removing them, leaving behind those ugly streaks. Other towels may shed, leaving you with streaks of dust, debris and lint. A towel that has been previously used for other purposes may have been contaminated with other cleaners. The oils and detergents in household cleaners can remain on towels even after they have been washed, making them useless for window cleaning.

How to Get Rid of Streaks on Your Windows

Now that you know what causes streaks, you can formulate the best plan to get rid of them. The proper way to remove window streaks or marks is to do another cleaning.

Here are a few tips to help you remove streaks.

Step 1. Go over the window using a dry dust-free microfiber cloth. Often streaks will vanish with a little elbow grease.

Step 2. If step 1 doesn’t work for you, it will be necessary to use a cleaning solution. We recommend a solution of dawn dish soap or another solution such as ecover.

Step 3. Apply the solution to a small area starting at the bottom of the window working upward, to avoid dripping. Be sure to work fast but clean thoroughly and with enough force that no residue is left behind. It is often helpful to use specialized window cleaning equipment like a squeegee.

Step 4. Go back and dry the edges of the window from the top down with a new or clean dust-free cloth.